When I bought my current Mac Pro, it came with nVidia’s GT8800 that I ordered as a factory upgrade from whatever was stock at the time.  The upgrade was inexpensive and got me a better GPU and more memory.  The card also supported Dual Link DVI to two displays and I have to say that I got over two years of excellent service from it.

But as I embark ever more deeply into video editing, I discovered that likely through my own ineptitude and lack of proper training, I was able to strain the capability of the GT8800 so I started researching alternatives.  There was the ATI Radeon HD 4870  on the Apple Store that had a faster GPU but no more video memory, there was the nVIDIA Quadro FX 4800 for nearly $2,300 (argh, choke) and the EVGA GeForce GTX 285.  I was not aware of the GTX 285 or of EVGA for that matter so I went over to my local Canada Computers and talked to John and Samuel.  Canada Computers is a retail chain that deals in all manner of kit but this store at least, attracts some seriously hardcore gamers and gamers as we know tend to beat on video cards pretty hard.  Both Samuel and John admitted to no familiarity with the Mac Pro platform but did share that they had enjoyed a lot of customer success with EVGA cards and with the Windows release of the GTX 285.  They did tell me that the GTX 285 had been superseded by the GTX 295 on the Windows platform and also advised that there was a hack out in the internet on making one work in a Mac Pro.  As I depend on the Mac Pro for work every day, i chose not to go that route and had them order me the Mac version of the GTX 285.  With no disrespect to Apple or Apple resellers, I saved at least 10% off the price of the card by getting it from these folks.

Installation was straight forward once I disconnected the web of cables from the Mac Pro and pulled its mass out from under the desk and into the kitchen where I could work on it without crippling myself.  I did learn some tips that might be useful for anyone else.

1. When EVGA says read the instructions first, do it.  If you are not running a current build of Snow Leopard, be absolutely sure you follow the instructions about installing the display drivers BEFORE you take things apart to install the card.  I found that on my machine, running 10.6.3 at time of install, the drivers had already been provided in an Apple update.  If you find this too, well you’ve burned a whole minute, but if you didn’t have the drivers installed and tried to power up the Mac with the new card and no drivers you’d be seeing a black screen and the only fix would be to pull the new card, put in the old card, load the drivers…You get the point.

2.  The PCI-e slots on the Mac Pro have little card locking clips that you engage when removing a card.  Using a flashlight helps you see them and helps you cut down on the cursing when you cannot figure out why the stock card will not come free of the slot.

3. The GT8800 has only one power cable.  The GTX285 has two.  Disconnect the one from the GT8800 before you try to remove the card as you’re going to need it in a minute.  The GTX285 comes with two new power cables, so you could use both new ones of course.  I did.

4.  The motherboard location of the two power ports you will be using is best accessed if you have 14″ long rubber fingers that are impervious to cuts and scrapes.  If you are not Mr. Fantastic, take the time to do the motherboard connections before you install the new video card.  If you don’t, you will just have to pull it out to get the cables connected, and if that happens, remember point #1.

5.  Did I mention that making those connections can be challenging?  I found that a pair of bent nose hemostats worked fine.  Connecting the upper slot first makes things easier as well.

6.  Once the cables are connected and latched onto the motherboard (check that the latching mechanisms on the power connectors have engaged), place the card into the slot.  Slot 1 is best because like most other high end video cards, the GTX 285 is a double-wide.

7.  Replace the card slot locking bar, put all the other pieces back together, connect your cables and fire it up.

At boot time and in normal operations, frankly you won’t see much of a difference.  If you use iStat and watch temps very closely, you might find the system runs a bit cooler.  Or not.  The new card really comes into it’s own when you are doing some intense editing in Final Cut Studio or Premiere Pro or Logic Studio.  Screen draws are faster in Aperture, and Photoshop seems snappier.  I’m not a gamer but I did speak to a guy who uses Steam on the Mac and he says this card is better than what I had for gaming.

In summary, if you need more video horsepower, can handle the expense, and are willing to read the instructions you will like the EVGA GeForce GTX285 Mac Edition.

HIGHLY RECOMMENDED